LTSI16 Blood/Infusion/Feeding Warmer-Buy Infusion Warmer on Leytemedica.com

Syringe and infusion pump

Home > Products > Operation Room Equipment > Syringe and infusion pump

Products

CUSTOMER CASE

LTSI16 Blood/Infusion/Feeding Warmer
No: LTSI16
Type: Syringe and infusion pump
Dimension:
Characteristics:
Adapter Output: DC 15V, 2.0A

Prev：LTSI15 Double Channel Enteral Feeding Pump

Next：LTSI10 Double Channel Syringe pump

Details
Pictures
Service
Q&A

Compatible tube:Transfusion set, infusion set or feeding set with diameter 3.5-5mm

Adapter Output: DC 15V, 2.0A

Protection class:I

Heating board Degree of protection:BF

Main engine Protection against ingress of water:IPX2

Control temperature:35°C - 42°C adjustable in 0.1°C steps

Temperature accuracy:±0.5°C (heating plate), ±1°C (warming tube)

Operational mode:Continuous operationDimensions :140x75x35mm Weight:210g

service life:5 years

Tube warmer Length: 800mm

Permissible environmental conditions for transport and storage:Temperature:-20°C – 55°C

Relative humidity:10– 90%

Atmosphere range:70 – 106 Kpa

Permissible environmental conditions for the ambient operating:

Temperature: +5 – 40°C.

Values higher or lower than the ranges specified above may cause damage to the device or its accessories.

Relative Humidity: ≤80%

Atmosphere range: 70 – 106 Kpa

Temperature

Use the warming slot output reference table ：

Infusion Rate(ml/h)		25		100		180		300		600		1000
Slot Length		Part	All	Part	All	Part	All	Part	All	Part	All	Part	All
Temperature Set（℃）	35	28.2	29.0	32.0	33.0	32.4	33.2	30.5	32.0	28.2	29.4	26.0	27.0
	37	29.2	30.8	33.4	34.8	33.4	35.0	31.6	33.6	28.8	30.4	26.5	27.5
	42	30.4	33.2	36.6	39.0	37.8	39.5	36.0	37.5	30.7	34.4	28.1	30.0

Note: Room temperature is 20 degrees, the temperature of the input liquid is 20 degrees, the output port of the warmer is at 125px from the outlet of the Warmer.

Use warmer tube output reference table:

Infusion Rate(ml/h)		25	100	180	300	600	1000
Temperature Set（℃）	35	29.2	33.8	34.5	34.8	32.2	30.0
	37	31.2	35.6	36.5	36.5	33.8	30.5
	42	33.6	39.8	41.0	41.0	36.2	32.5

Note: Room temperature is 20 degrees, the temperature of the input liquid is 20 degrees, the output port of the warmer is at 125px from the outlet of the Warmer Tube.

The heating effect is on the basis of the actual use (infusion environment temperature, infusion rate, soft and hard, thickness, and diameter of the infusion tube wall will affect the heating effect)